Blower Snouts, Drive Shafts and Accessories
RCD's blower snouts are the strongest and lightest on the market. Each snout is machined from solid aluminum or magnesium and is complete with all bearings, seal and mounting hardware. Drive shafts are available in different lengths and materials for the required application.
Blower Snouts w/Rubber Seal
PN: 157000-0038 Blower Snout 6.00"
w/Rubber Seal - Aluminum Housing
PN: 157000-0042 Blower Snout 5.00"
w/Rubber Seal - Aluminum Housing
5 inch complete with Belt Guard
5.00" complete with Snout Mounted Blower Belt Guard and starter bracket. Snout mounted Blower Belt Guards will fit ALL Blower Snouts without requiring fixed stands.

Blower Snouts w/Graphite Teflon Seal
PN: 157000-0025 Blower Snout 12.00" w/Graphite Teflon Seal and Steel Hub - Aluminum Housing
PN: 157000-0026 Blower Snout 12.00" w/Graphite Teflon Seal and Titanium Hub - Magnesium Housing
PN: 157000-0022 Blower Snout 8.00" w/Graphite Teflon Seal and Steel Hub - Aluminum Housing

Refer to: Blower Snout Sections for snout dimensions and details.

  • Blower drive shafts and rear drive hub are sold separately
  • Blower drive shaft may require cutting to length
  • Optional seals are available for the required application
    Rubber, Viton and Graphite Teflon.
Blower Drive Shafts
3 in 1 Blower Drive Hub - SSI

PN: 157002-50 3 in 1 Blower Drive Hub - SSI
PN: 157000-92 Kobelco Sleeve Adapter
PN: 157000-94 Roots Sleeve Adapter

PN: 157017-30 Blower Drive Shaft 7.00" 4140 Steel
PN: 157017-32 Blower Drive Shaft 7.00" 300M Steel
PN: 157017-34 Blower Drive Shaft 9.50" 4140 Steel
PN: 157017-36 Blower Drive Shaft 9.50" 300M Steel
PN: 157017-38 Blower Drive Shaft 12.00" 4140 Steel
PN: 157017-39 Blower Drive Shaft 12.00" 300M Steel
PN: 157017-40 Blower Drive Shaft 12.00" Titanium

 

PN: 157019-0005 Snout Support Link Set (includes fasteners)

This spacer allows the blower to be moved back 1.50" while retaining the blower sprocket in the same location.
NOTE: If a blower mount starter is used, the stands must be extended 1.50"
PN: 157000-0090
 		Blower Snout Spacer
Blower Snout Spacer
Snout Support Link Set
RCD's Snout Support Link Set is used with the Snout Mounted Clamp or Faceplate. It provides a convenient adjustment that can be removed with the blower without removal of any hardware.