|
Removable Blower Mount Starter |
| This is our most popular starter assembly. The blower mount removable starter features unobstructed access to the blower belt and top sprocket. This assembly features an aluminum frame, steel handle and quick disconnect plug mounted on the starter. A second plug is included to attach your cables and battery pack. A hand wheel at the rear of the starter is used to manually engage the jaws thereby lengthening its life. With the starter removed, all that remains is the face plate, stands, jaw and belt guard. This starter requires approximately 14" in front of the top blower sprocket. PN:100500-0011 Starter Assembly Blower Mount |
 |
Blower Mount Starter Drives |
PN:100521-01, 100521-02 and 100521-03
(Item numbers are for stands only.) |
RCD offers a complete selection of blower mount starter drives for various applications. These starter drive mounts are used in conjunction with the blower mount removable starters. Starter drives are configured per application, utilizing a top blower belt guard or lightweight aluminum faceplate, various length stands and appropriate hardware. Stands for spacing are available in the following standard lengths: 1.75", 2.625" and 3.0". Please call for configuration of your application. | 
Refer to:
Belt Guards for details. |
Stiffener KitThis optional stiffener kit can be used in conjunction with any of the standard length stands to increase their length by 1.25". Kit includes bolts, spacers and aluminum stiffener.PN: 100521-50 |
 |
Starter MotorsRCD's high torque electric starter is designed for the direct cranking of high performance racing engines. The unit consists of a heavy-duty electric motor, planetary reduction gearing, multiple-disk clutch, automatic engaging device and driving jaw. The motor is series wound, of the intermittent duty type, which produces a very high starting torque. The reduction gearing has a ratio of approximately 12:1. The three tooth starter jaw automatically engages when the starter switch is closed and disengages when the engine starts. Operating on 48 volts DC, a minimum cranking speed of approximately 600 r.p.m. can be expected while drawing a maximum of 150 amperes. The motor, gear train, engaging mechanism and attaching drives are high quality construction intended to provide years of service with minimum maintenance.
PN:101500-0085 Starter w/Handwheel 6" |
|
