This is the complete kit needed for your engine, if you use a fixed crank mount starter. Aluminum strut plates attach to the front of the block providing a strong foundation for the starter mount. Aluminum stands bolt to the 3/8" thick aluminum faceplate and to the strut plates to hold the starter concentric with the end of the crankshaft. The stands have dowels in both ends and diagonal braces for added rigidity. A steel engine jaw and aluminum spacer along with all bolts, studs, nuts and washers are provided in the kit. The unit requires 13.00" in front of the plate. (Please refer to the price list for pricing and PN's.) Available for the following applications: Small Block Chevy Big Block Chevy TFX Chrysler 426/440 - 392/417 Fontana PN:101010-0012 through PN:101010-0062

Fixed crank mount starter drive kit with front bearing support

This design combines the dependable starting features of the standard fixed starter drive with a crankshaft front bearing support. The kit provides a rigid aluminum crankshaft support and a solid starter platform. A steel drive hub with engine jaw keyed solidly to the drive hub. The total assembly requires 15-1/2" in front of the crankshaft and weighs 45 lbs. with starter. (Please call for pricing and PN's for your application.) Available for the following applications: Small Block Chevy Big Block Chevy Refer to: BBC Crank B/S Sectional TFX Chrysler 426/440 - 392/417 Fontana PN:101020-0002 through PN:101020-0054

Fixed crank mount starter drive, unblown This fixed crank mount starter drive was designed for unblown engines. With the stroker gear drive assembly snapped into the faceplate, the engine is easily rotated with the starter bolted to the bracket. The stroker assembly will fit on either side of the starter and removes in a second when you are ready to race. PN:101030-0012 Fixed Crank Mount Drive 6in BBC PN:101030-0013 Fixed Crank Mount Drive 6in BBC w/Dampner PN:101030-0042 Fixed Crank Mount Drive 6in TFX PN:101030-0043 Fixed Crank Mount Drive 6in TFX w/Dampner PN:101030-0052 Fixed Crank Mount Drive 6in 426 PN:101030-0053 Fixed Crank Mount Drive 6in 426 w/Dampner

Removable crank mount starter This starter is made for starting unblown engines directly off the crankshaft. The bracketry and special frame allow for ease of engagement and removal. This starter requires approximately 15" in front of the crankshaft and features the same electrical set-up as the "Removable Blower Mount Starter". PN:100500-0020 Starter Assembly Removable Crank Mount

Crank mount removable starter drive

This is the complete kit needed for your engine. Aluminum strut plates attach to the front of the block providing a strong foundation for the starter mount. Aluminum stands bolt to the 3/8" thick aluminum faceplate and to the strut plates to hold the starter concentric with the end of the crankshaft. The stands have dowels in both ends and diagonal braces for added rigidity. A steel engine jaw and aluminum spacer along with all bolts, studs, nuts and washers are provided in the kit. PN:101040-0002 Removable Crank Starter Drive SBC PN:101040-0012 Removable Crank Starter Drive BBC PN:101040-0022 Removable Crank Starter Drive 417 PN:101040-0032 Removable Crank Starter Drive 481X PN:101040-0042 Removable Crank Starter Drive TFX PN:101040-0052 Removable Crank Starter Drive 426/440 PN:101040-0062 Removable Crank Starter Drive Fontana