Products

Track Shipment
Belt Guards
Starters & Accessories
Belts
Battery Packs & Accessories
Crank Hubs & Accessories
Pulleys
Blower Snouts & Spacers
Camshaft Gear Drives
Crank Support Assemblies
Crank Trigger Assemblies
Tools & Organizers
Fuel Pump Accessories
Idler Plates & Idler Pulleys
Magneto & Accessory Drives
Oil System Parts
CHAIN CAMSHAFT DRIVES

Resources

Downloads
Calculators
Tracking
Catalog Request
Flip Book
Links
Wallpapers
Instructions

Company

Contact
About RCD
Meet The Team
 530.292.3133
 530.292.3133
MENU

Products / QUICK CHANGE CRANK HUBS

SKU:

CRANKSHAFT

PSI SPLINE RCD SPLINE STANDARD

MATERIAL

STEEL TITANIUM
CRANKSHAFT PSI SPLINE MATERIAL STEEL 534.17 202603-76 This threaded hub is made from steel, works with a RCD rear crank support and is made to fit a crankshaft with a PSI spline.
CRANKSHAFT PSI SPLINE MATERIAL TITANIUM 1096.44 202603-75 This threaded hub is made from titanium, works with a RCD rear crank support and is made to fit a crankshaft with a PSI spline.
CRANKSHAFT RCD SPLINE MATERIAL STEEL 359.86 202603-49 This threaded hub is made from steel, works with a RCD rear crank support and is made to fit a crankshaft with a RCD spline.
CRANKSHAFT RCD SPLINE MATERIAL TITANIUM 1040.21 202603-50 This threaded hub is made from titanium, works with a RCD rear crank support and is made to fit a crankshaft with a RCD spline.
CRANKSHAFT STANDARD MATERIAL STEEL 534.17 202603-11 This threaded hub is made from steel, works with a RCD rear crank support and is made to fit a standard crankshaft with two 1/4" keyways.
CRANKSHAFT STANDARD MATERIAL TITANIUM 815.3 202603-12 This threaded hub is made from titanium, works with a RCD rear crank support and is made to fit a standard crankshaft with two 1/4" keyways.

QUICK CHANGE CRANK HUBS

RCD quick change crank hubs allow for a quick pulley change in the pits or in line for your run. Each hub has 6 drive lugs machined to fit with RCD splined pulley’s, a left-hand thread is provided to secure the pulley to the hub using a pulley retaining nut. Hubs also have six 3/8-24 threaded holes to work with a crank hub puller.